Utilizer AN111 is intended for destructing the information on HDDs of longitude and transversal recording types. It is well-tested comprehensively for many years and is certified in Quality Control Systems and Safety Control Systems of Russian Federation.
Utilizer AN111 is a monoblock device (see Figure 3) with a special chamber to install the HDD, information on which should be destructed. The main features:
• The very high speed of erasing (one cycle takes less than a second);
• Device can be in a 'Ready' state as long as necessary without changing of properties;
• High reliability due to absence of mechanically moving parts;
• The destruction of information on HDD without causing it any physical damage;
• Information the broken of defective carriers can be erased also;
• The construction of the chamber allows the 'hot swapping' of HDD's of most common types;
• There's an amplitude measuring instrument of the erasing magnetic field;
• Magnetic field and chamber's parameters allows to erase information on the many types of magnetic carriers (video and streamer cassettes, 3'5 disks, Zip- and Jaz-disks, etc.)
• Optional: remote control and monitoring system (review of magnetic field amplitude, main element's conditions, operation mode);
The further usage of a carrier after erasing is not possible.
|
|
|
figure3 |
The main technical characteristics of Utilizer AN111.
|
Parameter |
Value |
|
The size of the working chamber |
38 x 222 x 118 mm |
|
Time taken for the "Readiness" state |
> 10 sec |
|
Minimum interval between two erasing cycles |
1O sec |
|
Time taken on 1 erasing cycle |
> 0,1 sec |
|
Initialization way |
'Start' button on a front panel |
|
Length of a "Readiness" state |
Unlimited |
|
Power supply |
Current network -220 V/50...60 Hz |
|
Current consumption |
3 A |
|
Dimensions |
158 x 158 x 330 mm |
|
Weight |
5 kg |